RSS Feed

Tag Archives: DIY Project

Galvanized Metal Tray Makeover and Jet Lag

I’ve come (back) from the Land Down Under!

It was a great trip.  I saw amazing sites, drank a lot of beer, watched a lot of tennis and truly enjoyed my first full-fledged vacation in years.

Australia maintained its reputation for vicious insect attacks (I stepped on a bee at the beach).  Fortunately the area is named “Manly Beach” and my response to was, I assure you, very Manly.

Sometimes men emit high pitched screams.  We can do that.  Don’t judge.

I also discovered that I no longer tan.

I used to.  I used to turn a nice olive color but now I just become bright red and then, overnight,  it fades back to my natural color, Pasty Accountant White (part of Sherwin Williams new spring color collection).

Disappointing.

I flew back on Friday and discovered Michaels Craft Store was celebrating my return with one of their super-rare 60% off coupons (thoughtful!)  so I dragged my severely jet-lagged self to the store.

I’d intended to just stock up on a supply item but stumbled across this metal tray michaels-tray-makeover

And for 60% the cost came down to $10 and my, admittedly somewhat addled, mind saw possibilities!

It’s a cool tray but, being  me , I thought it could use some graphic enhancement and had been curious to see if the polycrylic technique I’d tried with my yardstick tray  and Halloween candle holder would work on metal.

Back home I got right to work (…after accidentally falling asleep for approximately two days…..)!

I pulled some bicycle graphics from the ever-reliable Graphics Fairy (her blog is also the source for the polycrylic transfer method)graphic-fairy-bicycle-imagegraphics-fairy-bicycle-ad

and did a little mixing and matching in Photoshop to get the look I wanted.crescent-bicycle-tray-master-2017

Of course, as always, the tray was larger than my printing capabilities so, after reversing the graphic, I printed it out in three sections on my laser printer (I just use plain old Staples brand legal sized paper for this).diy-metal-tray

The transfer method is the same as for the signs.

I laid down a nice layer of polycrylic on the bottom of the trayMetal Tray Makeover with Image Transfer

I laid the pieces in place, smoothed them down with a brayer, wiped away any excess polycrilic and…..went back to bed.

After letting it dry overnight I began to rub away the paper with a wet cloth until the image was revealed.diy-michaels-crafts-tray-transformation

It worked great!  galvanized-tray-makeover-project-by-cheltenham-roadIt actually worked a little too great and I had to go back in and rub really hard to remove some of the image to get the distressed look I wanted.image-transfer-on-metal-tray-from-michaels-crafts

I think this opens up a lot of fun possibilities.  My image is black and white but I’m quite sure colors would work just as well.

And now I must go back to factory mode for a short while.  200 coasters due at a store and my sister Sally arrives on Thursday for a visit!

Advertisements

I’m All About the Bling – Easy DIY Jewelry Holder Tutorial

So, apparently I – a non-jewelry wearer – am nonetheless a jewelry holder maker. Who knew?

You may recall I recently made a jewelry holder for my friend Karla and shared it as my Mod Podge Rocks project.DIY Jewlery HolderThis got the Muse (Geralyn) thinking and she came up with a variation of her own and another jewelry holder was born!

I may actually go into the jewelry holder business as this to was quick and easy to make.

I started withSupplies for DIY Jewelry Holder Cheltenham Road Tutorial

  • A piece of birch plywood – edges routed (you could just buy a plaque at Michaels if you’re not the routing type)
  • Mod Podge Transfer Medium
  • Hard Coat Mod Podge
  • 6 glass knobs
  • old candle
  • Sandpaper
  • Foam Brush
  • Quote – printed in reverse using a laser printer or copier (bottom line ink jet won’t work)
  • painters tape (somewhat optional depending on your confidence)
  • Pink latex paint (not shown)
  • White latex paint (not shown)

Tools

  • aforementioned Router (optional)
  • Electric Drill and bit
  • Forstner Bit (maybe…..see explanation below)
  • better math skills than mine

None of this will be particularly new information to long time readers (my apologies) so you might want to just say to yourself “I got this” and skip to then end (I didn’t hurt myself making it either so you won’t be missing any highlights or anything).

PREPPING THE BOARD

After routing the birch plywood I painted the edges pink and let it dry.how to create distressed paint effect

To create the chipped paint effect I used the old candle and rubbed wax along the edges just where I wanted to the pink to show through and applied the top coat of white paint (the white paint won’t stick to the candle wax).

After letting that thoroughly dry I just sanded along the edges to reveal the underlayer of pink and took a really bad picture of it.make a vintage style jewelry holder

ADDING THE TEXT

Geralyn found this perfect quote from Mark Twain:jewelry holder quote mark twain

I used a font called Forelle (available from Dafont) to create the text, reversed it (key!) and printed it out on plain, legal sized paper, using my laser jet printer.

I applied a good coat of Mod Podge Transfer to the printed side of the paper and then laid it, face down, on the wood smoothing out any bumps or wrinkles – you want good solid contact between the paper and the wood – and left it to dry overnight.Jewelry Holder TutorialIn the morning I used a pretty damp cloth and, after soaking the paper, rubbed it away to reveal the quote.graphic transfer to wood

To drill the holes I laid down a couple of pieces of blue painters tape and marked where I wanted the knobs to go (this is where the patience to do math would serve you well. I kind of eyeballed it and goofed a bit and it came out perfectly!).Jewelry Holder - marking for knobs Cheltenham Road Tutorial

Before installing the knobs I sealed the whole thing with a couple of coats of Hard Coat Mod Podge – just for durability.

KNOB INSTALLATION

This will vary depending on what kind of knobs you’re using. In my case the glass knobs are held in place with nuts. However, I wanted the plaque to hang flush on the wall and with the nuts that wasn’t going to happen. I used a Forstner Bit to drill countersink holes on the back of the plaque. For most knobs you could just use flat head screws to keep them in place and therefore skip this step.Jewlery Holder Cheltenham Road Tutorial

And that was it!  2nd Jewelry holder achieved!Jewlery Holder Tutorial Cheltenham RoadLEGAL DISCLAIMER

This blog does not advocate storing your jewelry on your backyard fence. If your jewelry is lost or stolen due to hanging it on the backyard fence this blog is not responsible.

See, I keep making things that need to be hung on walls. Unfortunately, they don’t tend to be things for me and I’m not keen putting random screws on well-lit walls around my home.

The backyard fence however is totally down with random screwing (difficult to believe but that sentence sounded even weirder in my head) and creates a nice, rustic backdrop don’t you think?Make a Jewelry Holder Easy DIY Tutorial Cheltenham Road

%d bloggers like this: