Got a bit distracted over the past few weeks but I’m……”back on track?” …. well, that kind of implies there was a track to begin with which might be overstating things….. let’s just go with “I’m continuing to continue.”
So the next couple of weeks will be all about preparations for the upcoming, April 28-29th Jackalope Pasadena Art Fair.
It’s a great show. I’m excited about it and determined to
- come up with some new coaster designs,
- have enough coasters on hand, and
- really make use of all that scrap wood for some one-of-a-kind projects.
I have a million ideas – I just need to do the “hard” work of turning them from ideas into actual, physical things.
Oh, and I also need a new booth set up.
Bottom line – it’s going to be a super relaxing couple of weeks filled with bon-bon consumption and channel surfing……
It’s pretty easy to do but I thought I’d outline the steps in case anyone out there might like to give it a go.
Here is what I used
- Wood stain
- Some thin strips of scrap wood cut to size
- Wood stain/antiquing glaze
- Paint (Folk Art Milk Paint in my case)
- E6000 glue
After staining the tray I cut my scrap wood to size (2.5″ by 16″) and went to my Plaid supply box and pulled out Folk Art Milk Paint (Petticoat color) and Folk Art Antique Wax. After painting the slats with Petticoat I went back in and “aged” the edges with the antiquing wax.
I glued the strips in place using the trusty E6000 glue and left it to dry overnight.
After working out the South Pasadena design I reversed it and printed it on my laser printer using plain old, Staples brand, legal paper
I used my Polycrylic transfer technique (you can see details here) and, after letting it dry overnight, rubbed away the paper with a wet rag (you can be pretty aggressive).
*I have found one refinement for this process.
The technique works perfectly but you do sometimes end up being able to see a slight demarcation where edge of the paper was. I found that if I spread the poly carefully so as to avoid sealing down the very edges it minimizes this effect.
I seal all my trays with Envirotex Lite.
It’s easy to use (as long as you follow the directions to the letter) but you do have to prep the surface. I seal everything with a coat or two of Matte Mod Podge taking particular care to run a bead of MP around the inside of the tray to seal up any gaps.
What could happen if one skips this step?
Hypothetically …… One might return to check on one’s project and think “Gee, it seems like there is a lot less Envirotex in that tray than before.”
One then might find the missing Envirotex all over the kitchen table and dripping onto floor.
One might then panic and instinctively touch the insanely sticky, spilled Envorotex WITH BOTH HANDS.
One then (finally using one’s brain) might go to get paper towels and discover one is out of paper towels.
One might then try to open the pantry door with insanely sticky hands and then attempt to tear open the plastic wrapper with one’s insanely sticky hands and then return to the now even bigger mess on the kitchen table with one’s hands covered in plastic and paper towel bits.
One down! So many more ideas to work on!